Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
03 // NEWS & BRIEFINGS

News & Briefs

Creality Falcon T1C compact dual-laser engraver, official product render
Industry2026.11.17· 4 min read

Industry: Creality unveils the Falcon T1C dual-laser engraver — 15 W blue diode plus 5.5 W infrared, galvo speeds to 6,500 mm/s

On 17 November, Creality announced the Falcon T1C, a compact dual-laser engraver built for personalization businesses: a 15 W blue diode laser for wood, bamboo, leather and dark acrylic, plus a 5.5 W infrared laser for precision metal marking. A high-speed galvo setup reaches scan speeds of up to 6,500 mm/s in specified image engraving modes, with spot sizes as fine as 0.03 x 0.03 mm. Pre-orders are open now ahead of a global launch in mid-December 2026; the standalone edition lists at US$1,699 in the US, with a US$50 deposit bringing the pre-order price to US$1,199.

Nikon SLM Solutions MACHX 450 metal laser powder bed fusion system in a factory hall, official product photo
Industry2026.11.17· 4 min read

Industry: Nikon SLM Solutions unveils MACHX at Formnext — up to 8 kW of laser power for series metal production

On 17 November, Nikon SLM Solutions unveiled MACHX at Formnext 2026 in Frankfurt: a new family of metal laser powder bed fusion systems built for series production, not prototyping. Three build envelopes share one architecture — the MACHX 450 (450 x 450 x 450 mm), 450C (450 x 600 x 450 mm) and 450E (450 x 450 x 1,000 mm) — with up to 8 kW of laser power and a 25-minute changeover between builds. The pitch is throughput density: more production per square metre of factory floor.

A laser illumination fiber at an endoscope tip projecting a wide cone of light (JUYAO editorial concept visual)
Industry2026.11.16· 4 min read

Industry: OMNIVISION and Myriad Fiber launch the VINERA surgical visualization platform — a 100-micron laser illumination fiber for endoscopes

On 16 November, OMNIVISION and Myriad Fiber Imaging (MFI) jointly launched the VINERA surgical visualization platform: OVMed medical image sensors (up to 2 megapixels) and image-processing technology, combined with MFI’s new laser illumination fiber — as small as 100 microns, delivering high-intensity, wide-angle illumination over 140 degrees. The platform targets laparoscopy, hysteroscopy, endoluminal robotic surgery, urology and other applications, and will be demonstrated at OMNIVISION’s booth 8a|D01 at COMPAMED in Düsseldorf, Germany, on 16–19 November.

Lambda blog hero graphic: optical links across a grid, headlined 'World's first large-scale CPO deployment'
Industry2026.11.16· 4 min read

Industry: Lambda runs NVIDIA Photonics CPO switches across 10,000+ GPUs — latency down up to 10.1%

On 16 November, Lambda announced the world's first large-scale deployment of co-packaged optics (CPO) networking: NVIDIA Photonics switches connecting more than 10,000 NVIDIA Blackwell Ultra GPUs at its Quebec campus. In Lambda's benchmarks against conventional pluggable optics, the CPO switches held throughput identical while cutting network latency by 3.8% at rack scale and 10.1% at pod scale, with the optics running at a median 36 °C versus 51 °C. It is the first time CPO has been shown working at AI-factory scale, not just in a lab or a pilot rack.

The POWDERBED Core 1 desktop controller: a silver enclosure with SCANNER 1, SCANNER 2 and LASER connectors on the front panel
Industry2026.11.15· 4 min read

Industry: POWDERBED launches Core 1 — an off-the-shelf scanner and laser controller for laser powder bed fusion, with open-source machine software

POWDERBED (a brand of Danish company Aagaard AM) has launched Core 1, a ready-made single-laser desktop controller for laser powder bed fusion (LPBF): it pairs a SCANLAB RTC6 Ethernet scan controller with the Autodesk Machine Control Framework (AMCF, open-source under the BSD-3 licence), supports the SL2-100 and XY2-100 scanner protocols, and costs €9,900 net. Customers supply their own mechanics, optics and laser, and POWDERBED configures the controller for their specific laser and scanner. Core 1 will be shown for the first time at Formnext 2026 in Frankfurt, 17–20 November, at the Sensortherm stand.

Figure 1 of the paper: the experimental setup for closed-loop depth-controlled ablation — the control system (RTC 5 and software) switches the ultrafast laser (1030 nm) on and off from the target depth and the OCT-measured depth, the processing beam passes a dichroic mirror and a galvanometer scanner and is focused onto the sample by an F-θ lens, and the OCT-based depth measurement system (centre wavelength 1080 nm) measures coaxially with the processing beam
Research Watch2026.11.15· 4 min read

Research Watch: Micron-precision depth control in ultrafast-laser volumetric ablation — an OCT closed loop cuts deviation from over 20 µm to 1–2 µm

On 15 November, a team at the Institut für Strahlwerkzeuge (IFSW), University of Stuttgart, published an open-access paper in Scientific Reports: combining an ultrafast laser (600 fs, 1030 nm) with a galvanometer scanner and a coaxial optical coherence tomography (OCT) system for real-time closed-loop depth control, they volumetrically ablated AISI 304 stainless steel with a depth accuracy of 1–2 µm for target depths of 50–500 µm. Two corrections — extrapolation-based compensation of an initial depth offset and a pixel-wise moving-average termination criterion — cut the deviation of the basic closed loop, which exceeded 20 µm: a 100 µm target measured 99.7 µm, a deviation of only 0.3 µm.

Figure 1 of the paper: the transition from a two-dimensional BIC to chirality-locked one-dimensional interface and zero-dimensional junction BICs, clockwise and counterclockwise unit-cell designs with right- and left-circularly polarized far-field distributions, the band structure, domain assignment, far-field intensities of 5×5 domains and the mode evolution with rotation angle
Research Watch2026.11.14· 4 min read

Research Watch: Chirality-locked low-dimensional BIC lasers — low-threshold lasing localized at one-dimensional interfaces and zero-dimensional junctions

On 14 November, teams at Seoul National University and Kyung Hee University published an open-access paper in Nature Communications: rotating the four-hole square-lattice unit cell by +6° and −6° to interface two domains of opposite chirality, they realized low-threshold bound-state-in-the-continuum (BIC) lasers localized at the one-dimensional interface between the domains and at the zero-dimensional junction where four quadrants meet — the interface laser peaks at 1590 nm with a threshold of about 0.4 kW/cm², the junction laser peaks at 1564 nm with a threshold of about 0.65 kW/cm², both linewidths narrowing to about 0.3 nm, with the Q factor inferred to exceed 5000.

LightSolver’s Laser Processing Unit (LPU): a rack-mounted unit on a dark-blue display plinth
Industry2026.11.11· 4 min read

Industry: LightSolver to give the first public demonstration of its all-optical computer — the Laser Processing Unit heads to SC26

On 11 November, LightSolver, a subsidiary of CollPlant, announced that its Laser Processing Unit (LPU) will be demonstrated in public for the first time at the SC26 supercomputing conference in Chicago on 16–19 November, solving systems of linear equations, differential equations and complex optimisation problems live with interacting laser beams. The LPU computes without electronic components and is designed to work alongside conventional GPUs; the same event will also feature its PDE-based corrosion simulation work with Boeing.

JUYAO editorial visual: red, green and blue laser beams enter a cuvette of nanoparticle suspension and merge into a single white beam
Research Watch2026.11.10· 3 min read

Research Watch: Upconversion nanoparticles boost blue emission ~1,500-fold — a single-system white laser comes closer

On 11 November, a team from Harbin Institute of Technology and the University of Technology Sydney published an open-access paper in Nature Communications: a core@shell cascaded-transition strategy selectively populates the high-lying dormant states of holmium ions (Ho3+), boosting blue emission ~1,500-fold over conventional architectures and delivering balanced red, green and blue output under 10 W/cm² excitation. The single-system white light beats mixed-nanoparticle media on stability and produces white lasers for photonics.

Photograph from the Xanadu announcement: an ultra-low-loss patterned thin-film lithium niobate (TFLN) wafer under test on an optical test station, with a fibre probe suspended above the wafer
Industry2026.11.10· 4 min read

Industry: Xanadu and HyperLight cut optical switch loss to 7 millidecibels — thin-film lithium niobate photonic quantum hardware takes another step

On 10 November, Xanadu Quantum Technologies and HyperLight announced that optical switch insertion loss has been cut to 7 millidecibels (mdB) using thin-film lithium niobate (TFLN) technology — nearly three times better than the partners’ 20 mdB result from 2025. The result was demonstrated on a high-volume wafer line on HyperLight’s TFLN Chiplet™ platform, with what the companies describe as excellent yield and repeatability; Xanadu says its quantum-compatible switches are ready to ramp to production.

JUYAO editorial visual: inside a shipyard hall, a robotic arm runs a hybrid laser-arc weld along the seam of a large steel hull section, the weld point glowing with a blue-white laser spot and orange arc light
Industry2026.11.09· 3 min read

Industry: India’s first indigenous hybrid laser-arc welding system unveiled — Cochin Shipyard and SFO open laser engineering centre

On 11 November, India’s SFO Technologies and Cochin Shipyard (CSL) unveiled the country’s first indigenously designed and manufactured hybrid laser-arc welding (HLAW) system and inaugurated a new Advanced Laser Engineering Centre with a dedicated HLAW R&D facility. The system integrates laser welding, conventional arc welding, robotics and automation around a high-power fibre laser source developed in-house by SFO, aimed at thick-plate welding for shipbuilding, defence and heavy engineering.

Original TRUMPF photograph: three engineers inspect a weld seam in front of a laser welding setup, with the welding optics and red cabling in the foreground
Industry2026.11.09· 4 min read

Industry: TRUMPF welds 14 cm of steel in a single pass with vacuum laser deep welding — a 50 kW laser sets a deep-welding record

On 9 November, TRUMPF announced that, together with RWTH Aachen University, it has used a 50 kW high-power laser to join steel to a depth of 14 cm in a single welding operation — a record for laser deep welding; the previous comparable laser processes reached 6 cm. The new process, laser welding in a vacuum (LaVa), welds under a reduced ambient pressure of 50 mbar and uses BrightLine Weld beam shaping so the beam penetrates deeper than at normal pressure. TRUMPF says thick-walled steel components could be completed with far fewer weld passes, saving energy, time and cost.