Computational Engraving
Continuous tone, error-diffusion halftoning, vectorisation, hatch strategies, and kinematic path planning.
Advancing image discretization, kinematic path planning, material parameter modeling, and hardware integration — translating peer-reviewed optics research into verifiable laser software.
Continuous tone, error-diffusion halftoning, vectorisation, hatch strategies, and kinematic path planning.
From optical fluence input to colour transitions, ablation depth, surface roughness, and HAZ control.
Hybrid vector/raster canvas architecture, structured project files, parametric primitives, and cross-device UX.
Job intermediate representations (IR), real-time transport protocols, firmware coordination, calibration, and safety.

Butt-welding 0.5 mm TA1 titanium to 304 stainless steel with a 1.2 mm AZ61S magnesium filler wire: at 800–1000 W ring power or 100–200 Hz scanning frequency, every joint averaged over 80% of the filler strength, peaking at 281.2 MPa; at 1400 W ring power the strength fell to 117.4 MPa, and at 400 Hz scanning frequency to 106.5 MPa. The good process is not “bigger” — it is “just right”.

One 500 fs laser, one AISI 301 stainless steel plate, only the polarization state changed: at 30 mW, linear polarization cut bacterial adhesion to 0.0482 times the untreated surface, circular polarization to 0.1393 times — while all six textures sat in a narrow 32.6–36.9° contact-angle band. Antifouling is decided by stripe directionality, not by wettability.

Two inputs, two outputs, two hidden layers (10 + 5 neurons): predicting groove width and discoloration-band width together across 1–10 W and 10–100 mm/s, with 11–15% errors — valid as interpolation inside that parameter space only.

Direct welding of a transparent ceramic to titanium alloy in ambient air: a 2.55–5.72 μm transition zone, and a strength peak that is not at the highest power.

Dual-ligand ink plus an 80 °C pre-bake: tackling disordered grain growth and solvent micro-explosions at once.

Pinning energy at the interface: 3-ps bursts at 500 kHz heat accumulation weld at 10 mm/s and 57.7 MPa.

Temporal shaping as an independent process parameter: energy must arrive within the ~2 ns cavitation-shielding window.

On 17 November, Creality announced the Falcon T1C, a compact dual-laser engraver built for personalization businesses: a 15 W blue diode laser for wood, bamboo, leather and dark acrylic, plus a 5.5 W infrared laser for precision metal marking. A high-speed galvo setup reaches scan speeds of up to 6,500 mm/s in specified image engraving modes, with spot sizes as fine as 0.03 x 0.03 mm. Pre-orders are open now ahead of a global launch in mid-December 2026; the standalone edition lists at US$1,699 in the US, with a US$50 deposit bringing the pre-order price to US$1,199.

On 17 November, Nikon SLM Solutions unveiled MACHX at Formnext 2026 in Frankfurt: a new family of metal laser powder bed fusion systems built for series production, not prototyping. Three build envelopes share one architecture — the MACHX 450 (450 x 450 x 450 mm), 450C (450 x 600 x 450 mm) and 450E (450 x 450 x 1,000 mm) — with up to 8 kW of laser power and a 25-minute changeover between builds. The pitch is throughput density: more production per square metre of factory floor.

On 16 November, OMNIVISION and Myriad Fiber Imaging (MFI) jointly launched the VINERA surgical visualization platform: OVMed medical image sensors (up to 2 megapixels) and image-processing technology, combined with MFI’s new laser illumination fiber — as small as 100 microns, delivering high-intensity, wide-angle illumination over 140 degrees. The platform targets laparoscopy, hysteroscopy, endoluminal robotic surgery, urology and other applications, and will be demonstrated at OMNIVISION’s booth 8a|D01 at COMPAMED in Düsseldorf, Germany, on 16–19 November.

On 16 November, Lambda announced the world's first large-scale deployment of co-packaged optics (CPO) networking: NVIDIA Photonics switches connecting more than 10,000 NVIDIA Blackwell Ultra GPUs at its Quebec campus. In Lambda's benchmarks against conventional pluggable optics, the CPO switches held throughput identical while cutting network latency by 3.8% at rack scale and 10.1% at pod scale, with the optics running at a median 36 °C versus 51 °C. It is the first time CPO has been shown working at AI-factory scale, not just in a lab or a pilot rack.

POWDERBED (a brand of Danish company Aagaard AM) has launched Core 1, a ready-made single-laser desktop controller for laser powder bed fusion (LPBF): it pairs a SCANLAB RTC6 Ethernet scan controller with the Autodesk Machine Control Framework (AMCF, open-source under the BSD-3 licence), supports the SL2-100 and XY2-100 scanner protocols, and costs €9,900 net. Customers supply their own mechanics, optics and laser, and POWDERBED configures the controller for their specific laser and scanner. Core 1 will be shown for the first time at Formnext 2026 in Frankfurt, 17–20 November, at the Sensortherm stand.

On 15 November, a team at the Institut für Strahlwerkzeuge (IFSW), University of Stuttgart, published an open-access paper in Scientific Reports: combining an ultrafast laser (600 fs, 1030 nm) with a galvanometer scanner and a coaxial optical coherence tomography (OCT) system for real-time closed-loop depth control, they volumetrically ablated AISI 304 stainless steel with a depth accuracy of 1–2 µm for target depths of 50–500 µm. Two corrections — extrapolation-based compensation of an initial depth offset and a pixel-wise moving-average termination criterion — cut the deviation of the basic closed loop, which exceeded 20 µm: a 100 µm target measured 99.7 µm, a deviation of only 0.3 µm.
Guangdong Juyao Intelligent Technology Co., Ltd. is based in Guangzhou, China, building software for laser processing systems across imaging algorithms, path planning, material parameter libraries, and hardware integration.
This public monograph archive publishes source-checked bilingual readings of peer-reviewed papers alongside industry briefings. Experimental findings remain credited to original authors with full DOI and license citations.