Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Industry2026.11.17· 4 min read

Industry: Nikon SLM Solutions unveils MACHX at Formnext — up to 8 kW of laser power for series metal production

Nikon SLM Solutions' MACHX family brings up to 8 kW of laser power and a 25-minute changeover to mid-size metal powder bed fusion — with "throughput density", output per square metre of factory floor, as the headline metric.

Nikon SLM Solutions MACHX 450 metal laser powder bed fusion system in a factory hall, official product photo
COVERImage: Nikon SLM Solutions (official MACHX 450 product page).
EXECUTIVE SUMMARY

On 17 November, Nikon SLM Solutions unveiled MACHX at Formnext 2026 in Frankfurt: a new family of metal laser powder bed fusion systems built for series production, not prototyping. Three build envelopes share one architecture — the MACHX 450 (450 x 450 x 450 mm), 450C (450 x 600 x 450 mm) and 450E (450 x 450 x 1,000 mm) — with up to 8 kW of laser power and a 25-minute changeover between builds. The pitch is throughput density: more production per square metre of factory floor.

01 / One platform, three envelopes, up to 8 kW

MACHX is a family, not a single machine. The MACHX 450 offers a 450 x 450 x 450 mm build envelope for general industrial production; the MACHX 450C stretches the Y axis to 450 x 600 x 450 mm for automotive and other long, flat parts; and the MACHX 450E extends the Z axis to 450 x 450 x 1,000 mm for tall components such as rocket engine thrust chambers. Because the platform, software and process are shared, parameters and know-how developed on one system carry across the family — and laser and optics packages can be upgraded after purchase.

The laser side offers up to 8 kW of total power: four or eight 1 kW Gaussian lasers, or four 2 kW lasers with selectable beam-shaping options. A new generation of optics, developed with Nikon optical engineers, controls up to 2 kW per laser, with zoom and defocus adjusting the beam from 80 to 760 µm during the build. Higher power can lower the cost per part for aluminium, titanium and some nickel alloys, according to the company.

02 / Built as a fleet: 25-minute changeover, lights-out running

The design target is lights-out serial production. With the optional cylinder exchange, the next cylinder is preheated outside the build chamber while the current job runs; Nikon layer-surface monitoring technology then levels the platform and verifies the first powder layer automatically, so the next build starts just 25 minutes after the last one finishes. Interfaces for automated material handling and shared depowdering let several systems work as one production cell, and a 230 L Universal Powder Tank supports long, uninterrupted runs.

The footprint argument is explicit: the MACHX 450E places around 200 litres of build volume in approximately 13 m² of floor space. Nikon SLM Solutions calls the measure "throughput density" — how much a factory floor produces per square metre — and frames MACHX as the answer to customers who now ask how fast a system can run, how reliably it can perform and how confidently it can scale, rather than whether additive manufacturing is possible at all.

03 / Thermal control and SLMX: the same history for every part

More laser power means more heat, and MACHX answers with interchangeable plate packages for different temperature regimes: a low-temperature package actively cools between 80 and 200 °C, with about eight times the cooling performance of previous systems, and a mid-temperature package covers 200 to 450 °C. Sensors under the build plate, a liquid-cooled process chamber and build-part thermal conditioning are meant to give every part on the plate the same thermal history.

MACHX is also the first platform for SLMX, Nikon SLM Solutions' fully adaptive process ecosystem, which brings together the thermal architecture, PanX simulation, build processing, optical tomography, advanced optics and process intelligence. Fringe projection scans each powder layer in 3D to catch recoating problems as they happen, while optional optical tomography watches the melting process layer by layer. The launch took place at Formnext 2026 in Frankfurt on 17 November at 10:00 CET, Hall 12.0, Booth D119.

PRIMARY REFERENCES & LINKS

  • MACHX by Nikon SLM Solutions
    Industrial Print Magazine · 17 November 2026

    Full launch release verified: published 17 November 2026; the three build envelopes, 8 kW laser configurations, 25-minute changeover, 200-litre / 13 m² figure and SLMX details all come from this release text.

    Open source link ↗
  • MACHX 450 – Nikon SLM Solutions
    Nikon SLM Solutions · MACHX 450 product page

    Official product page cross-checked: build envelopes, laser configurations, beam-size range, 25-minute changeover and SLMX description agree with the launch release.

    Open source link ↗