Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Industry2026.11.10· 4 min read

Industry: Xanadu and HyperLight cut optical switch loss to 7 millidecibels — thin-film lithium niobate photonic quantum hardware takes another step

In a photonic quantum computer, optical switches route the photons that carry quantum information to where they need to go. The catch is that quantum signals cannot simply be amplified the way ordinary optical signals can — amplify them and the fragile quantum state is destroyed. So how much light each switch loses directly sets how large such a machine can grow. The number Xanadu and HyperLight report this time is 7 millidecibels: roughly 0.16% of the light lost per switch.

Photograph from the Xanadu announcement: an ultra-low-loss patterned thin-film lithium niobate (TFLN) wafer under test on an optical test station, with a fibre probe suspended above the wafer
COVERImage: Xanadu (as carried by HPCwire).
EXECUTIVE SUMMARY

On 10 November, Xanadu Quantum Technologies and HyperLight announced that optical switch insertion loss has been cut to 7 millidecibels (mdB) using thin-film lithium niobate (TFLN) technology — nearly three times better than the partners’ 20 mdB result from 2025. The result was demonstrated on a high-volume wafer line on HyperLight’s TFLN Chiplet™ platform, with what the companies describe as excellent yield and repeatability; Xanadu says its quantum-compatible switches are ready to ramp to production.

01 / The number: what 7 millidecibels means

An insertion loss of 7 mdB means roughly 0.16% of the light is lost each time a signal passes a switch. Against the partners’ 20 mdB result from 2025 (about 0.46%), the per-switch loss has fallen to about a third. Xanadu CEO Christian Weedbrook also states in the release that the result is 10 times lower than “our closest competitor’s most recent published result” — the companies’ own comparison, with no reference device or test conditions given.

What matters as much as the number is where it was achieved: a high-volume wafer line on HyperLight’s TFLN Chiplet™ platform, with what the release describes as excellent yield and repeatability. For photonic quantum computing, lower switch loss means higher fidelity and fewer lost qubits, so a system can scale without compensating through exponential increases in laser power or hardware redundancy. On that basis Xanadu says its quantum-compatible switches are “ready to ramp to production”, bringing fault-tolerant photonic quantum computing a step closer.

02 / The platform: one TFLN platform serving AI data centres and quantum computing

HyperLight CEO Mian Zhang notes in the release that the same TFLN Chiplet™ platform that supplies high-volume AI data centres and telecom networks has now delivered the record 7 mdB switch loss for quantum computing. That points to a second layer of meaning for laser and photonics readers: thin-film lithium niobate is becoming a shared platform spanning classical optical communications and quantum hardware — high-speed modulation, low loss and wafer-scale production, with the same process capability reused across two markets.

Weedbrook adds that the ultra-low-loss photonic quantum technology could offer value beyond quantum computing, across the broader data-centre ecosystem, as data centres become faster and more energy intensive. That remains a directional statement: the release gives no specific data-centre product or timetable.

03 / Significance and limits: a “ready for production” signal, not a paper

For JUYAO’s readers, the point of this announcement is not quantum computing itself but manufacturing: optical switch loss cut from 20 mdB to 7 mdB, demonstrated on a production line — one of the signs that photonic integration is moving from “laboratory record” to “deliverable hardware”. The fact that the same thin-film lithium niobate platform is being adopted by AI data centres also means the process, supply chain and test capability are being proven by a larger market.

The limits need stating too: the 7 mdB figure, the yield and repeatability, and the “10x lower” claim all come from the press release, with no peer-reviewed paper and no independent third-party test, so the test method and sample size cannot be checked; Xanadu’s “ramp to production” refers to the manufacturing readiness of the switch devices, not to a complete fault-tolerant quantum computer being ready. Read it as “one more manufacturing bottleneck solved for photonic quantum hardware”, rather than as “the quantum computer has arrived”.

PRIMARY REFERENCES & LINKS

  • Xanadu Reports Lower Optical Switch Loss for Photonic Quantum Computing
    HPCwire · 10 November 2026

    Full release verified: published 10 November 2026; the 7 mdB insertion loss, the nearly threefold improvement over the 20 mdB result of 2025, the high-volume wafer-line demonstration, and the remarks by Weedbrook and Zhang all come from this release; the caption describing an ultra-low-loss patterned TFLN wafer undergoing optical testing comes from the same article.

    Open source link ↗
  • Xanadu and HyperLight Achieve Breakthrough of Nearly 3x Reduction in Optical Switch Loss, Accelerating Path to Commercial Photonic Quantum Systems
    GlobeNewswire · 10 November 2026

    GlobeNewswire release verified via republication: identical in full to the release carried by HPCwire, published 10 November 2026, 12:07 UTC.

    Open source link ↗