Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Industry2026.11.09· 3 min read

Industry: India’s first indigenous hybrid laser-arc welding system unveiled — Cochin Shipyard and SFO open laser engineering centre

In a shipyard, weld seams run for kilometres, and welding speed sets the pace of a ship’s delivery. At an inauguration ceremony on 11 November in Kalamassery, Kerala, laser welding moved to the centre of that question: SFO Technologies and Cochin Shipyard unveiled India’s first indigenous hybrid laser-arc welding system and opened a laser engineering centre dedicated to developing the technology.

JUYAO editorial visual: inside a shipyard hall, a robotic arm runs a hybrid laser-arc weld along the seam of a large steel hull section, the weld point glowing with a blue-white laser spot and orange arc light
COVERJUYAO editorial visual (concept schematic, not a measured experimental image).
EXECUTIVE SUMMARY

On 11 November, India’s SFO Technologies and Cochin Shipyard (CSL) unveiled the country’s first indigenously designed and manufactured hybrid laser-arc welding (HLAW) system and inaugurated a new Advanced Laser Engineering Centre with a dedicated HLAW R&D facility. The system integrates laser welding, conventional arc welding, robotics and automation around a high-power fibre laser source developed in-house by SFO, aimed at thick-plate welding for shipbuilding, defence and heavy engineering.

01 / The system: laser leads, arc fills, robot guides

Hybrid laser-arc welding combines the strengths of two processes: the laser’s concentrated energy and deep penetration open the weld pool, while the conventional arc’s high deposition rate fills the groove, with robotics and automation controlling the path and parameters. The system jointly developed by SFO and Cochin Shipyard follows this architecture, built around a high-power fibre laser source developed in-house by SFO — described in the report as the country’s first indigenously designed and manufactured system of its kind.

The unveiling took place at the Advanced Laser Engineering Centre at NeST Hitek Park, inaugurated by Jose V. J., Chairman and Managing Director of Cochin Shipyard, and N. Jehangir, Chairman and Managing Director of SFO Technologies. The centre will focus on research, testing, validation and commercialisation of advanced laser technologies, and its dedicated HLAW R&D facility opened the same day.

02 / Why now: shipbuilding’s welding bottleneck, and self-reliance

For shipbuilding, welding is the operation that sets both build time and structural quality: hull sections have long seams and thick plates, and conventional arc welding needs many filler passes, which is slow and hard on distortion control. The report says the new system is expected to deliver faster welding speeds, deeper penetration, lower distortion and more consistent welds, with applications spanning shipbuilding, defence, heavy engineering, railways, energy, and the manufacture of large tanks and wagons.

The other layer is self-reliance: the report frames the system within India’s Atmanirbhar Bharat (self-reliant India) push — reducing dependence on imported laser welding platforms and keeping high-end manufacturing technology domestic. SFO’s Jehangir said at the inauguration that developing the high-power fibre laser source in-house and integrating it with welding, robotics and automation demonstrated that “high-end manufacturing technologies can be conceived, engineered and built in India”.

03 / Significance and limits: an unveiling, not a set of process data

For JUYAO’s readers, the significance sits on the industrial side: hybrid laser-arc welding is spreading from the shipbuilding powers of Europe and East Asia to more countries, and the combination of a domestic fibre laser, robotic hybrid welding and a dedicated R&D centre is the typical path by which a country builds thick-plate welding capability. Cochin Shipyard — one of India’s largest shipbuilders — is a partner from the start, which suggests the system is aimed at real hull-construction needs rather than a laboratory demonstration.

The limits need stating: this was a system unveiling and a centre inauguration, and the report gives no verifiable process figures at all — no laser power, welding speed, applicable plate thickness or weld mechanical properties — so “faster, deeper, less distortion” remains an expectation for now. The real process capability will only be judged when test and validation data follow. Read it as “the starting point of India’s shipbuilding laser-welding capability”, rather than as a proven process breakthrough.

PRIMARY REFERENCES & LINKS

  • Cochin Shipyard, SFO Tech develop Hybrid Laser Arc Welding technology
    The Hindu BusinessLine · 11 November 2026

    Full report verified: published 11 November 2026; the first indigenous HLAW system, the inauguration of the Advanced Laser Engineering Centre and R&D facility, the high-power fibre laser source developed in-house by SFO, the shipbuilding and defence applications, and the remarks by both companies’ heads all come from this report.

    Open source link ↗
  • SFO Technologies and Cochin Shipyard unveil India’s automated HLAW system
    NewsBytes · 11 November 2026

    Corroborating report verified: published 11 November 2026; the first indigenous HLAW system, the 11 November unveiling, the fibre laser at its core, and the shipbuilding and defence applications agree with the BusinessLine report on the key facts.

    Open source link ↗