Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Research Watch2026.11.10· 3 min read

Research Watch: Upconversion nanoparticles boost blue emission ~1,500-fold — a single-system white laser comes closer

Ideally, a white laser would be emitted by a single material producing red, green and blue light that then combine into white. In practice, the hardest colour to switch on inside upconversion nanoparticles is blue: excitations sitting on high-lying energy levels are dissipated before they can emit light. A new paper from Harbin Institute of Technology and the University of Technology Sydney, published on 11 November, gets around that bottleneck — blue emission roughly 1,500 times stronger than in conventional architectures, with the three colours balanced under moderate excitation.

JUYAO editorial visual: red, green and blue laser beams enter a cuvette of nanoparticle suspension and merge into a single white beam
COVERJUYAO editorial visual (concept schematic, not a measured experimental image).
EXECUTIVE SUMMARY

On 11 November, a team from Harbin Institute of Technology and the University of Technology Sydney published an open-access paper in Nature Communications: a core@shell cascaded-transition strategy selectively populates the high-lying dormant states of holmium ions (Ho3+), boosting blue emission ~1,500-fold over conventional architectures and delivering balanced red, green and blue output under 10 W/cm² excitation. The single-system white light beats mixed-nanoparticle media on stability and produces white lasers for photonics.

01 / The bottleneck: blue is the hardest colour to switch on

Lanthanide-doped upconversion nanoparticles convert low-energy excitation into multicolour, narrowband emission, making them candidates for bioimaging, lasers and displays. But multicolour output has long faced a dilemma: using the lanthanides’ abundant energy levels for many colours means fighting the rapid deactivation of high-lying states. Holmium ions (Ho3+) are a particularly hard case — highly susceptible to multiphonon relaxation and back energy transfer, so excitations on high-lying levels dissipate before they can emit light, leaving blue the weakest colour.

That is what makes white light hard: red, green and blue must all be present at once and in balance, and without blue there is no white to speak of. The usual workaround has been to mix nanoparticles that emit different colours, but mixed systems bring their own weaknesses in stability and uniformity.

02 / The method: a core@shell cascade that relays energy up to the high-lying states

The approach from Jun Zeng and colleagues at Harbin Institute of Technology is cascaded-transition control inside a core@shell structure: engineered energy relays at a key intermediate level, Ce3+-mediated cross-relaxation control, and precise spatial arrangement of the ions pass the energy along step by step, selectively populating the high-lying dormant states of Ho3+. The abstract reports the result as a ~1,500-fold boost in blue emission over conventional architectures.

Under 10 W/cm² excitation and a 10 mg/mL suspension, the single system delivers balanced red, green and blue output. The authors state that this white-light system surpasses mixed-nanoparticle media in stability and that it produces white lasers for photonics. The work was carried out by Harbin Institute of Technology (lead) with the Institute for Biomedical Materials & Devices at the University of Technology Sydney; the corresponding authors are Yunfei Shang, Shuwei Hao and Jiajia Zhou.

03 / Significance and limits: good news at abstract level, details await the Version of Record

For laser readers, the point is that the “single-system white light” route looks feasible: if one kind of nanoparticle can emit all three colours in balance, the material and device structure of a white laser can be much simpler than a mixed system, with potential uses in multicolour imaging, displays and anti-counterfeiting. The 1,500-fold figure concerns blue light — precisely the colour that used to be weakest — so its significance lies not only in the number but in filling the missing piece of the three-colour set.

The limits need stating: only the abstract can be verified at present, and the laser cavity type, threshold, individual wavelengths, colour coordinates, stability duration and comparison figures are all still out of sight — as is the exact baseline behind the 1,500-fold comparison (“conventional architectures”). This article does not speculate on those numbers; they should be checked again once the Version of Record is published, before deciding whether to follow up with a deeper read.

PRIMARY REFERENCES & LINKS

  • Activation of high-lying dormant states by cascaded transition control in core@shell upconversion nanoparticles
    Nature Communications · 11 November 2026

    Open-access paper verified: published 11 November 2026, DOI 10.1038/s41467-026-79259-1, CC BY-NC-ND 4.0; the core@shell cascaded-transition strategy, the Ce3+-mediated cross-relaxation control, the ~1,500-fold blue-emission boost, the 10 W/cm² and 10 mg/mL conditions, the stability advantage over mixed media, and the white lasers all come from the abstract; at the time of verification the online version was an early-sharing version and the full text and figures were not yet available.

    Open source link ↗