Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
03 // NEWS & BRIEFINGS

News & Briefs

Photograph from the RIT laboratory: Professor Jie Qiao (left, in red) with Ph.D. student Muhammad Akif Qadeer beside the femtosecond laser fabrication setup, with the laser processing system on an optical table to the right
Research Watch2026.11.09· 4 min read

Research Watch: A femtosecond laser directly figures and finishes freeform optics — 1.0 nm RMS figure error on borosilicate glass

On 9 November, the Rochester Institute of Technology (RIT) reported that Professor Jie Qiao’s team has used a femtosecond laser to directly figure and finish freeform optical surfaces, shaping and polishing in a single step with no separate polishing stage. The underlying paper was published in Optics Express on 21 July 2026 (open access): an experimentally characterised and numerically optimised point influence function models the surface response, iterative scan-path deconvolution generates the fabrication trajectories, and Zernike-polynomial freeform surfaces on borosilicate glass reach a root-mean-squared figure error of 1.0 nm.

JUYAO editorial visual: thin blue and orange beams of light travel along fibres between racks and optical modules in a data-centre hall, suggesting high-speed optical interconnect
Industry2026.11.08· 4 min read

Industry: OIF launches seven new projects at once — external laser source ELSFP 3.0 alongside 448G electrical interfaces

On 9 November, the Optical Internetworking Forum (OIF) announced seven new technical projects at its quarterly technical meeting in Bangkok, spanning 448G electrical interfaces, 200G bidirectional optical transmission, external laser sources, module management and coherent optical security — a direct response to AI data centres’ demand for bandwidth, energy efficiency and interoperability. Most relevant to lasers are two external-laser-source projects: the ELSFP Implementation Agreement advancing to revision 3.0, and an elongated Type-3 ELSFP supporting a 40W high-power mode.

JUYAO editorial visual: a small satellite in the night sky beams a thin blue laser down to a cluster of ground stations, with the arc of the Earth and night lights below
Industry2026.11.07· 4 min read

Industry: UK military satellite Titania reaches orbit — laser satellite-to-ground communications testbed enters commissioning

On 7 November, the UK Ministry of Defence confirmed that the military satellite Titania is in orbit: the roughly 100 kg spacecraft launched on 1 October aboard a SpaceX Falcon 9 and is operated by UK Space Command under the ISTARI programme. Titania’s original mission is to demonstrate low-Earth-orbit satellite-to-ground free-space optical communications (FSOC) — returning reconnaissance data to an optical ground station via a narrow laser beam, with the builder targeting a 10 Gbps in-orbit optical demonstration. The 7 November announcement, however, emphasises Earth observation and reports no laser-link verification results; the satellite has now entered a commissioning period lasting several months.

JUYAO editorial visual: a red laser beam enters a white integrating sphere while a fine speckle pattern is projected onto the dark surface below, recorded by a camera
Research Watch2026.11.07· 4 min read

Research Watch: Laser speckle spectrometer breaks into the femtometre scale — 6 fm resolution at 780 nm, about 80 times better than before

On 7 November, Nature Communications published research from the University of Adelaide: using an integrating sphere as a multiply scattering cavity, a laser speckle spectrometer has broken into the femtometre scale for the first time — 6 fm resolution at 780 nm, a resolving power of 1.3×10⁸, about 80 times better than previous speckle spectrometers. The device clearly resolves laser sidebands from an electro-optic modulator and directly measures the hyperfine structure of the ⁸⁵Rb D2 transition, agreeing with independent wavemeter measurements. The paper is open access (CC BY 4.0).

JUYAO editorial visual: a micro-ring resonator waveguide on a thin-film lithium niobate chip glows softly, with the layered chip edge faintly visible
Research Watch2026.11.06· 4 min read

Research Watch: Thin-film lithium niobate directly hosts all-optical memristors — 3-bit multilevel non-volatile optical memory at hundreds of femtojoules per bit

On 6 November, Nature Photonics published research from Shandong University: using CMOS-compatible oxygen-ion implantation, spatially separated oxygen-doped and defect-rich layers are formed in thin-film lithium niobate, turning this widely used photonic platform itself into an all-optically controlled memristive material — photonic memristors can be fabricated directly on lithium niobate waveguides, with no heterogeneous integration. The devices demonstrate 3-bit multilevel non-volatile memory, switching energies of hundreds of femtojoules per bit and submicrosecond optical response. The full text is subscription-only; this item is compiled from the publicly available abstract and publication record.

JUYAO editorial visual: an operator wearing amber laser safety glasses works at an enclosed desktop laser machine while a small wooden nameplate is engraved inside the housing, a warm glow visible through the enclosure window
Safety Basics2026.11.06· 8 min read

Laser Safety 101: Before Your First Job

Before your first laser job, set three baselines: how to protect your eyes, what to check before switching on, and what to do first when something goes wrong. Using a first project — engraving a small wooden nameplate — this lesson explains eyewear wavelength and OD, what MPE and NOHD mean, and the check-and-watch habits for the whole job.

JUYAO editorial visual: inside an AI datacenter rack, high-speed optical module slots connected by fibre-optic cables glowing blue
Industry2026.11.05· 5 min read

Industry: Applied Optoelectronics’ Q3 2026 revenue hits $269.9 million, up 127.5% year over year — a 1.6T long-term agreement locks in $1–1.5 billion as in-house laser capacity races to expand

On 5 November, Applied Optoelectronics (Nasdaq: AAOI) reported results for the third quarter of 2026 (ended 30 September 2026): revenue of $269.9 million, up 127.5% year over year and 40.6% sequentially — a sixth consecutive quarterly record — and a return to GAAP profitability, with net income of $6.3 million, or $0.07 per share (versus a net loss of $17.9 million, or $0.28, a year earlier); non-GAAP net income was $14.8 million, or $0.17 per diluted share (versus a $5.4 million loss a year earlier). Datacenter revenue reached $155.6 million, up 254% year over year and about 58% of total revenue; 800G product revenue nearly quadrupled sequentially to $47.5 million. In October the company signed a multi-year 1.6-terabit transceiver agreement with a Tier 1 hyperscale datacenter customer, expected to generate $1–1.5 billion over three years; a second agreement, potentially five times larger and covering 800G products and laser components, is in the final stages of negotiation. Fourth-quarter revenue is guided at $385–420 million.

JUYAO editorial visual: inside a dark laser-processing hall, a high-power fibre-laser cutting head cuts a glowing seam into a steel plate, sparks flying
Industry2026.11.05· 4 min read

Industry: nLIGHT’s Q3 2026 revenue reaches $73.8 million, up 10.5% year over year — defense and advanced manufacturing drive growth, product gross margin hits a record

On 5 November, nLIGHT (Nasdaq: LASR) reported results for the third quarter of 2026 (ended 30 September 2026): revenue of $73.76 million, up 10.5% year over year and above the high end of its August guidance; gross margin of 33.1%, up from 31.1% a year earlier; adjusted EBITDA of $11.05 million, up 55.4%; non-GAAP net income of $10.2 million, or $0.16 per diluted share (versus $4.3 million, or $0.08, a year earlier); and a GAAP net loss of $7.18 million, or $0.12 per share. By line, products revenue was $48.05 million and development revenue $25.72 million, up 34.4% year over year. The company guided fourth-quarter revenue of $84–90 million, while about $15 million of product revenue is deferred to the first half of 2027 on supply-chain constraints.

JUYAO editorial visual: on a training ground at dusk, soldiers and an armoured vehicle fitted with laser duel-simulation devices, red laser beams crossing through the haze
Industry2026.11.04· 3 min read

Industry: Denmark awards Saab a direct framework agreement for laser duel-simulation training systems — BT46 I-LDS valued at SEK 3.75 billion

On 5 November, the Danish Defence Acquisition and Logistics Organisation (DALO) published a direct-award notice granting Saab a framework agreement for additional BT46 I-LDS instrumented laser duel-simulation systems, valued at an estimated SEK 3.75 billion with a maximum of SEK 4.75 billion; the agreement runs from 17 November 2026 to 17 January 2037, with an option for a five-year extension. The systems support realistic duel training for infantry and combat vehicles and must be fully compatible with the Danish Defence’s existing BT46 systems. The Danish Army field-tested the system at Oksbøl earlier this year; in March 2025 the Danish Ministry of Defence announced an I-LDS procurement for a combat battalion of about 1,000 soldiers and 200 vehicles, then estimated at around DKK 0.6 billion. Note: under the same-batch staggering rule this item is displayed on 4 November; the event date is 5 November.

JUYAO editorial visual: in a dark laboratory, a plasma channel runs through a vacuum chamber and a bright X-ray beam emerges from its end
Research Watch2026.11.04· 4 min read

Research Watch: Plasma wakefield accelerator drives a water-window X-ray laser — end-to-end simulations reach gigawatt-class coherent femtosecond pulses

On 5 November, Nature Communications published research from the University of Strathclyde, Heinrich Heine University Düsseldorf and ELI Beamlines: end-to-end simulations show that ultra-bright electron beams from a plasma-photocathode wakefield accelerator can drive wavelength-tunable, coherent, femtosecond X-ray laser pulses in the water window (2.3–4.4 nm) from a metre-scale undulator, at gigawatt-class peak power. The paper is open access (CC BY 4.0). The work is simulation-based and has not yet been demonstrated experimentally.

JUYAO editorial visual: inside a dark data-centre hall, bundles of cyan and amber optical fibres run between two rows of server racks
Industry2026.11.04· 4 min read

Industry: Coherent’s fiscal Q1 2027 revenue hits $2.37 billion, up nearly 50% year over year — datacenter & communications at 82% as AI optical interconnect becomes the growth engine

On 4 November, Coherent Corp. reported results for the first quarter of fiscal 2027 (ended 30 September 2026): revenue of $2.370 billion, up 49.9% year over year (56% on a pro forma basis) and 15.9% sequentially; GAAP gross margin of 39.1% and non-GAAP gross margin of 40.6%; GAAP diluted EPS of $1.90 and non-GAAP diluted EPS of $2.09 (up 80% year over year). By segment, datacenter & communications revenue reached $1,951.7 million, up 79% year over year and about 82% of total revenue, while industrial revenue was $418.6 million, below the $491.4 million of a year earlier. The company also raised its outlook: fiscal 2027 pro forma revenue growth is expected to exceed 60%, second-quarter fiscal 2027 revenue is guided at $2.55–2.75 billion, and Coherent expects its first $3 billion quarter before the end of fiscal 2027 and its first $4 billion quarter in fiscal 2028.

JUYAO editorial visual: in a factory, a robotic laser welding head works on a metal car body panel, throwing sparks
Industry2026.11.03· 4 min read

Industry: IPG’s Q3 revenue reaches $287.5 million, up 15% year over year — welding and additive manufacturing lift industrial sales, semiconductor laser revenue more than doubles

On 3 November, IPG Photonics reported third-quarter 2026 results (for the quarter ended 30 September 2026): revenue of $287.5 million, up about 15% year over year, the fourth consecutive quarter of double-digit year-over-year growth; GAAP net income of $20.3 million, or $0.47 per diluted share (versus $0.18 a year earlier); adjusted EPS of $0.61 and adjusted EBITDA of $51.5 million, up 39% year over year. By segment, industrial solutions revenue was $239.5 million, up 12% year over year, with welding the principal driver; advanced solutions revenue was $48.0 million, up 33% year over year, with semiconductor laser revenue more than doubling. The company guides fourth-quarter revenue at $265–295 million and expects to close its acquisition of Lumibird Medical in the fourth quarter.