Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Industry2026.11.08· 4 min read

Industry: OIF launches seven new projects at once — external laser source ELSFP 3.0 alongside 448G electrical interfaces

Seven projects from a single meeting is unusual for a standards body. OIF’s explanation is blunt: networking requirements for AI data centres are changing too fast to queue projects one by one. Two of the seven are directly about lasers — how external laser sources are specified, and how much power they can deliver — and that is a key link in whether co-packaged optics (CPO) can actually ship.

JUYAO editorial visual: thin blue and orange beams of light travel along fibres between racks and optical modules in a data-centre hall, suggesting high-speed optical interconnect
COVERJUYAO editorial visual (concept schematic, not a measured experimental image or a product photograph).
EXECUTIVE SUMMARY

On 9 November, the Optical Internetworking Forum (OIF) announced seven new technical projects at its quarterly technical meeting in Bangkok, spanning 448G electrical interfaces, 200G bidirectional optical transmission, external laser sources, module management and coherent optical security — a direct response to AI data centres’ demand for bandwidth, energy efficiency and interoperability. Most relevant to lasers are two external-laser-source projects: the ELSFP Implementation Agreement advancing to revision 3.0, and an elongated Type-3 ELSFP supporting a 40W high-power mode.

01 / The seven projects: from 448G electrical interfaces to coherent optical encryption

The seven projects fall into four areas. Electrical and optical interfaces contribute two: an energy-efficient half-retimed interface, EEI-448G RTLR, at 448 Gbps per lane, and bidirectional 200 Gbps-per-lane connectivity over O-band single-mode fibre for AI scale-up. Module management contributes two: MACsec management inside pluggable modules, and a USB-based management communication interface for CMIS. Interoperability contributes one: ZRsec (FlexOsec), layer-1 encryption for coherent optical interfaces in ZR applications.

The remaining two belong to external laser sources, the most directly laser-relevant: the External Laser Small Form Factor Pluggable (ELSFP) Implementation Agreement advances to revision 3.0, and an elongated Type-3 ELSFP will support Electrical Power Class 8, a 40W high-power mode. OIF attributes the concentrated batch of new work to AI and data-centre operators needing solutions “at an unprecedented pace”.

02 / Where the laser is: external laser sources are the power supply of co-packaged optics

Why do external laser sources deserve their own projects? In co-packaged optics (CPO) and advanced optical packaging, the laser no longer sits inside the same package as the optical engine but in a separate pluggable external module: thermal management becomes more flexible, a failed laser can be replaced on its own, and system design gains freedom. The price is that the interface must be standardised — how light couples in, how power is delivered, how much power is supported, how faults are managed — and ELSFP is the specification that governs that. Revision 3.0 and the 40W Type-3 variant point in the same direction: AI data-centre optical interconnect is moving to higher rates and higher power density, and the power and thermal budgets of external laser sources must follow. For laser-device vendors, a finalised ELSFP 3.0 will shape the form and interface of the next generation of external laser modules; for system vendors, it decides whether CPO solutions can be swapped between suppliers.

03 / Significance and limits: initiation is a starting point, not a delivery

One line needs drawing clearly: these seven projects are “initiated”, not “published”. An OIF Implementation Agreement typically takes several rounds of member discussion and interoperability testing from initiation to final form, and the release gives no timeline or performance commitment for any project. Reading “seven new projects” as “seven new standards have landed” would overstate the immediate impact.

The signal itself is real, though: launching seven projects at one meeting, with two of them for external laser sources, shows the bottleneck in optical interconnect shifting from “transceiver speed” toward “laser-source power delivery, thermal handling and serviceability”. For laser readers, the thing to track is not today’s press release but the forthcoming drafts of ELSFP 3.0 and the Type-3 40W project — that is where the technical details that actually decide product form will appear.

PRIMARY REFERENCES & LINKS

  • OIF Launches Seven New Technical Projects at Q4 Member Meeting, Reflecting Accelerating Demand for Next-Generation Connectivity
    OIF / Business Wire · 9 November 2026 · Press release

    Press release verified: published 9 November 2026; the seven project names and scopes, the 2–5 November meeting in Bangkok, the 200-plus member representatives and roughly 40 first-time attendees, ELSFP IA 3.0 and the Type-3 40W variant, and OIF’s 180-plus members all come from this release; the figures are the organisation’s own claims and have not been independently verified.

    Open source link ↗
  • OIF Launches 7 New Projects Targeting 448G Electrical Interfaces, 200G Bidirectional Optics and Coherent Link Security
    IEEE ComSoc Technology Blog · 9 November 2026

    Cross-checked against the IEEE Communications Society Technology Blog’s same-day report: the seven project areas, the ELSFP 3.0 and Type-3 40W external-laser-source projects, and the projects being at initiation stage rather than completed agreements all agree with the press release.

    Open source link ↗