Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Industry2026.11.02· 3 min read

Industry: TCI Cutting puts AI into fibre-laser cutting motion control — IA Smart Motion 2.0 reads the path ahead, holds speed on straights and slows only for corners

The bottleneck in fibre laser cutting is often not laser power but “braking”: the gantry must slow hard at every corner, and cycle time is eaten away one hard stop at a time. TCI’s new idea is to let the control look at the road ahead — knowing in advance whether a straight or a sharp bend is coming, so the speed profile can be drawn more cleverly: no slowing where speed is safe, slowing early where it is not.

TCI Cutting’s original article image: an automated line with a red robot arm, a TCI Dynamicline fibre laser cutting machine and a slatted cutting bed
COVERImage source: TCI Cutting (via Metalworking International).
EXECUTIVE SUMMARY

On 3 November, Spanish sheet-metal laser-cutting machine builder TCI Cutting introduced IA Smart Motion 2.0®: artificial intelligence built directly into the motion control of fibre laser cutting machines. The system predictively analyses the upcoming cutting path and adaptively adjusts speed and acceleration to the workpiece’s actual geometry — modulating motion early as the head approaches curves or tight radii, holding high speed on straight stretches, and rounding and braking only where precision requires it. The technology spans TCI’s 2D, 2D+Bevel and 3D fibre laser cutting solutions, with the company claiming smoother movements, optimised contour quality and reduced mechanical wear. The same ecosystem is TCI’s MAS Concept®: Manager PRO® production-management software networks shop-floor planning in real time, while the TCI Sorter 3.0® automated palletising system uses Smart Sorting® AI logic to decide extraction strategies autonomously and arrange parts on pallets by priority for subsequent steps.

01 / Predictive motion: read the path first, then set the speed profile

Much of conventional laser cutting’s cycle-time loss comes from hard braking and acceleration at complex direction changes. IA Smart Motion 2.0 puts AI into the motion-control layer: the system predictively analyses the upcoming cutting path and adaptively adjusts speed and acceleration to the workpiece’s actual geometry. As the head approaches curves or tight radii it modulates motion early, holds high speed on straight stretches, and rounds and brakes only where precision requires it.

The vendor’s claimed effects run in three directions: smoother movements, optimised contour quality and reduced mechanical wear, across 2D, 2D+Bevel and 3D fibre laser cutting solutions. The boundary matters, though: the coverage gives no cycle-time improvement percentage or contour-accuracy figure, and does not say which specific models are covered or whether this is standard on new machines or retrofittable — the very numbers that decide whether it is “worth it”, which await further vendor disclosure.

02 / From “cutting fast” to “flowing smoothly”: the MAS Concept’s end-to-end logic

TCI’s second argument is that optimising cutting alone is not enough: the bottleneck in modern sheet-metal manufacturing often sits downstream, in intralogistics and material handling. The MAS Concept (Machines, Automation, and Software) links all three into a networked ecosystem: Manager PRO production-management software bundles all production data and networks shop-floor planning in real time, and after the cut the TCI Sorter 3.0 takes over, using Smart Sorting AI logic to decide extraction strategies autonomously and arrange parts on pallets by priority for subsequent steps.

The design intent is clear: every step’s data feeds back into the whole system, cutting manual intervention and continuously optimising material flow. In other words, IA Smart Motion 2.0 addresses “single-machine cycle time” while the MAS Concept addresses “whole-line cycle time” — without the first, the second idles; without the second, time saved at the cutter is eaten up again in palletising and waiting.

03 / JUYAO take: laser software competition is expanding from “process parameters” to “motion and logistics”

For people building laser-processing software, the point of this story is not any single AI algorithm but a moving competitive boundary: where vendors once competed on power, speed, gas and focus — process parameters — they are now building “motion-curve intelligence” and “post-cut logistics intelligence” into the product definition. Cutting path, servo dynamics, nesting, part extraction and palletising are being designed as one data chain — exactly the direction in which laser software moves from “single-machine control” to “production-line system”.

Scepticism stays warranted: everything public so far is vendor claims, with no third-party measured cycle-time or quality data and no pricing or upgrade path. Three questions are worth tracking: first, how much cycle time predictive control really saves on real multi-variety, small-batch nesting; second, whether Smart Sorting can reliably extract parts from tightly interleaved sheets held by micro-joints; third, whether this ecosystem offers open interfaces or closed lock-in — an answer that decides whether it is an opportunity or a barrier for third-party software vendors.

PRIMARY REFERENCES & LINKS

  • TCI Cutting integrates AI into new laser cutting machines
    Metalworking International · 3 November 2026 · TCI Cutting coverage

    Coverage read in full: IA Smart Motion 2.0’s predictive path analysis and adaptive speed/acceleration, 2D/2D+Bevel/3D coverage, the MAS Concept with Manager PRO, TCI Sorter 3.0 and Smart Sorting all come from this coverage; cycle-time and accuracy figures are undisclosed and are not cited; the supplementary inertia/gripping section is marked as not from the press release and is not cited.

    Open source link ↗