On 29 October, Germany’s INLEAP Photonics announced that its new Hanover production facility for laser counter-drone systems would open on 30 October, moving the INLEAP® FASTLIGHT® HELD system from prototype development into industrial series production, with ramp-up and further deliveries beginning in November 2026 and the first turnkey systems handed to partner STARK at the same time. HELD (High Energy Laser Drone) is mounted on an all-terrain unmanned ground platform: it detects, tracks and identifies a drone, then directs the laser beam at its critical structural components to neutralise it within seconds; ultra-fast laser beam steering lets it track and engage moving targets with high precision, providing remotely operated protection for mobile units, temporarily secured areas and critical infrastructure. The line runs on one-piece flow — each system passing individually through six coordinated stations with no intermediate storage — to cut lead times and scale with demand. The company employs 50 people today and plans to grow its Hanover workforce beyond 100 by the end of 2027.
01 / The HELD system: AI finds the weak point, the beam stays on a moving target
As the release describes it, HELD works in three steps: detect, track and identify a drone, then direct the laser beam at its critical structural components to neutralise it within seconds. CTO and founder Dr.-Ing. Felix Wellmann’s statement names the crux: once AI has identified a drone’s vulnerable point, the technology must steer the beam onto it within seconds and keep it precisely aligned even as the target moves — against “small and fast” targets, beam-steering response and tracking precision are the system.
The system rides on an all-terrain unmanned ground platform, positioned for remotely operated protection of mobile units, temporarily secured areas and critical infrastructure. INLEAP’s other business line is worth noting: the same ultra-fast, precise laser beam steering is also applied to increasing the efficiency of industrial laser manufacturing processes — the company’s technology base spans industrial processing and defence, not a single military product.
02 / From prototype to volume: six stations and one-piece flow, the German manufacturing story
The new plant’s significance is “its own capacity”: prototype development before, series manufacturing in Germany now. The line follows the one-piece-flow principle — each HELD system passes individually through six coordinated stations with no intermediate storage — which the company says cuts lead times and flexes upward as demand grows. Ramp-up and further deliveries begin in November 2026, and the first turnkey systems go to partner STARK as production starts, a direct handoff from capacity to delivery.
The hiring plan is given alongside: 50 employees today, with the Hanover workforce to pass 100 by the end of 2027. Lower Saxony Minister-President Olaf Lies and Bundeswehr Cyber Innovation Hub (CIHBw) head Sven Weizenegger attended the opening; the two sides’ earlier “Laserdome” project had publicly demonstrated laser-based defence against a drone in flight at the civilian-operated Strausberg airfield near Berlin — described in the release as the first such demonstration at a public airport — and series production is framed as the signal that the capability is now being scaled toward operational use by the armed forces.
03 / JUYAO take: laser counter-drone competition is shifting from “technology demonstration” to “delivery capacity”
CEO and founder Dr.-Ing. Marius Lammers’ line in the release captures the European context: “Europe needs more than innovative technology. It needs the sovereign capacity to produce it at scale.” That is what lifts this story beyond a single product: competition in laser counter-drone systems is expanding from beam power and engagement footage into production lines, delivery cadence and domestic supply chains.
For laser-industry readers, a note of restraint is in order: the release gives no quantitative figures for the laser itself — no power, wavelength, engagement range or kill criteria — so real effectiveness still awaits public testing and delivery performance. Even so, the “prototype to series production” step is itself a signal: for directed-energy weapons to enter procurement reality, beam-steering precision, system integration and volume manufacturing must all clear at once, and INLEAP is putting all three on the same line.
PRIMARY REFERENCES & LINKS
- INLEAP Photonics official announcement: series production of laser-based C-UAS begins in Hanover
Official announcement read in full; used to verify the system description, production-line organisation, first deliveries, hiring plan and Laserdome background. All are company claims; no quantitative laser figures were disclosed.
Open source link ↗
