Guangdong Juyao Intelligent Technology Co., Ltd. · Laser Software & Process R&D
23°07′N 113°15′E · GUANGZHOU · PURE STATIC MONOGRAPH
← Back to news
Industry2026.10.21· 3 min read

Industry: Bodor debuts two premium tube laser cutters in Europe at EuroBLECH 2026 — four-chuck and cut-drill-tap lines in parallel

The tube-laser race stopped being about power alone long ago. In Hanover, Bodor rolled out two new lines at once: a “four-chuck” built for heavy tubes, and a “double-chuck” packing cutting, drilling and tapping into one machine — one bets on throughput, the other on process integration.

EuroBLECH 2026 show floor: two Bodor tube laser cutting machines on the stand, with tube loading racks and control screens
COVERImage source: Bodor Laser (via marketwiseindu.com).
EXECUTIVE SUMMARY

On 22 October, Bodor Laser announced via Business Wire the European debut of two premium tube laser cutting machines at EuroBLECH 2026 (20–23 October, Hanover, Germany; Hall 13, booths A181/A182, 1,400 m² stand). The four-chuck series uses a fully floating chuck configuration with unrestricted rotation; its dual-process mode improves heavy-tube efficiency, the system automatically matches chuck logic to tube and part length, and intelligent stepless retraction loads short tubes without re-homing. The brand-new double-chuck series integrates cutting, drilling and tapping on one platform (optional 14-position tool magazine), with laser scanning, visual recognition and intelligent sensors detecting tube contours, weld seams and process state in real time for dynamic cutting-centre adjustment. Also on show: the P6 60 kW, P3+Automation-12 kW and i3 6 kW sheet machines (P series up to 4G acceleration, 200 m/min), a 3 kW robotic laser welder and the Pro 1.5 kW handheld welder. The release adds: service centres in Germany and Hungary, 180+ countries and 500+ service locations worldwide; per FORWARD Business Information (Shenzhen), Bodor ranked No. 1 globally in 1 kW+ laser cutting machine sales for seven consecutive years (2019–2025).

01 / Two new lines: four-chuck for throughput, double-chuck for integration

The four-chuck series is keyed to “heavy-tube efficiency”: a fully floating chuck configuration with unrestricted rotation, a dual-process mode that significantly improves heavy-tube throughput versus conventional three-chuck machines; the system auto-matches chuck logic to tube and part length, and intelligent stepless retraction loads short tubes without re-homing, trimming auxiliary time.

The double-chuck series takes the other route: cutting, drilling and tapping integrated on one platform with an optional 14-position tool magazine, cutting workpiece transfers, repeat setups and inter-process waiting; laser scanning, visual recognition and intelligent sensors detect tube contours, weld seams and process state in real time, dynamically adjusting the cutting centre for stability.

02 / Full portfolio and European localisation

Beyond tube, Bodor showed three sheet machines: the P6 60 kW, the P3+Automation-12 kW (with automated loading and raw-material/finished-part storage) and the i3 6 kW, the P series reaching 4G acceleration and 200 m/min positioning speed; bending and welding were covered by the 3 kW robotic laser welder and the Pro 1.5 kW handheld welder. The 1,400 m² stand ranked among the five largest at the show — the biggest among Chinese exhibitors — with German-speaking specialists demonstrating on site.

The release also disclosed Bodor’s European service network: service centres in Germany and Hungary with 10+ local staff, 180+ countries and 500+ service locations worldwide. Also notable: per FORWARD Business Information (Shenzhen) data cited in the release, Bodor has ranked No. 1 globally in 1 kW+ laser cutting machine sales for seven consecutive years (2019–2025).

03 / JUYAO take

Read against HSG’s FABTECH play, the contrast is instructive: in the same week, two leading Chinese makers told “tube + intelligence + local service” stories at the two big Western shows. Bodor’s version leans on hardware process integration (cut-drill-tap in one, vision closed-loop); HSG’s leans on software intelligence (AI CutPilot) — but the competitive logic underneath is the same: as power and speed converge, differentiation lands on “one fewer process step, one less wait, someone local to fix it”.

For software and process research, Bodor’s “vision-based weld-seam detection with dynamic cutting-centre adjustment” is worth noting: weld-seam avoidance and centre adaptation in tube cutting are exactly where process software can add value.

PRIMARY REFERENCES & LINKS

  • Bodor official release: Two Premium Tube Laser Cutting Machines Make European Debut as Bodor Laser Brings End-to-End Metal Fabrication Solutions to EuroBLECH 2026
    businesswire.com, published 2026-10-22; vendor press release

    Full text verified; performance and sales figures are vendor claims

    Open source link ↗
  • marketwiseindu.com report: Bodor Laser Debuts Two Tube Laser Cutters at EuroBLECH
    marketwiseindu.com, published 2026-10-23; trade media

    Cover image carried here

    Open source link ↗